User Tools

Site Tools



check_commands:check_sbc_temperature

Check Command: check_sbc_temperature

Requires: NEMS 1.5+

check_rpi_temperature has been renamed check_sbc_temperature because it is not at all Raspberry Pi specific: Any system that has sysfs logged to /sys/class/thermal/thermal_zone0/temp will work.

Also tested on the NEMS Linux ODROID XU4 build.

This check command requires two arguments: Warning Temperature °C and Critical Temperature °C.

Default Thresholds

NEMS Linux comes with check_sbc_temperature pre-configured on the NEMS localhost. Here are the default thresholds:

  • ODROID XU4 76°C Warn / 82°C Crit
check_commands/check_sbc_temperature.txt · Last modified: 2019/01/07 20:12 by Robbie Ferguson