Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
burn_image [2018/02/07 11:41]
Robbie Ferguson
burn_image [2019/02/04 11:32] (current)
Line 5: Line 5:
   - Recommended:​ Unplug all USB flash drives, external hard drives, etc. from your computer (to prevent accidentally selecting and overwriting the wrong drive).   - Recommended:​ Unplug all USB flash drives, external hard drives, etc. from your computer (to prevent accidentally selecting and overwriting the wrong drive).
   - Download and install Etcher from https://​etcher.io/​   - Download and install Etcher from https://​etcher.io/​
-  - Run Etcher and browse to your downloaded NEMS Linux image file. If it was downloaded as a ZIP, unzip it first (right click, choose "​Extract Here".+  - Run Etcher and browse to your downloaded NEMS Linux image file. If it was downloaded as a ZIP, unzip it first (right click, choose "​Extract Here").
   - Plug in whatever device you are burning to (eg., SD card, eMMC chip). Etcher will automatically detect it, but you should press "​Select Drive" for good measure, just to make sure you're not overwriting the wrong device.   - Plug in whatever device you are burning to (eg., SD card, eMMC chip). Etcher will automatically detect it, but you should press "​Select Drive" for good measure, just to make sure you're not overwriting the wrong device.
   - Press "​Flash"​.   - Press "​Flash"​.
  • burn_image.txt
  • Last modified: 2019/02/04 11:32
  • (external edit)