This is an old revision of the document!


TEMPer

The TEMPer is an affordable (under $20) USB digital thermometer that accurately senses temperatures from -55 to +125 degrees Celsius / -67 to +257 degrees Fahrenheit. This is an ideal addition to the server room to generate alerts should temperatures fall outside a safe threshold.

TEMPer devices work on all NEMS Linux hardware platforms.

check_temper supports Critical and Warning states for both low (cold) and high (hot) temperatures.

For optimum accuracy, it is recommended to plug your TEMPer device into a short USB extension cord so the thermal data isn't impacted by the heat pulled from the USB port of your NEMS Server.

Supported Devices

Support is provided via temper.

In the following table ā€œIā€ means the sensor is internal to the USB stick and ā€œEā€ means the sensor is on a cable that is plugged into the USB stick.

Product Id Firmware Temp Hum Notes
TEMPer 0c45:7401 TEMPerF1.4 I Metal
TEMPer 413d:2107 TEMPerGold_V3.1 I Metal
TEMPerHUM 413d:2107 TEMPerX_V3.1 I I White plastic
TEMPer2 413d:2107 TEMPerX_V3.3 I,E White plastic
TEMPer1F 413d:2107 TEMPerX_V3.3 E White plastic
TEMPerX232 1a86:5523 TEMPerX232_V2.0 I,E I White plastic

Terminal Output

To receive the JSON output, type nems-info temper

Adding to your NEMS NConf

The check_temper program has been added to NEMS NConf, but requires some brief initial configuration in NEMS 1.5 (as it was issued as a patch).

  1. Edit the check_temper checkcommand
  2. Change params description to: Critical Low Temp,Warning Low Temp,Warning High Temp,Critical High Temp
  3. Change amount of params to: 4
  4. Submit
  5. Add check_temper as a service to your NEMS host, having connected the TEMPer device to your NEMS Server's USB port.
  • hardware/temper.1564495205.txt.gz
  • Last modified: 2019/07/30 10:00
  • by Robbie Ferguson