Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
system_requirements [2019/02/04 11:32]
127.0.0.1 external edit
— (current)
Line 1: Line 1:
-====System Requirements==== 
- 
-===NEMS Linux on Raspberry Pi 3/3 B+=== 
- 
-The first-generation Raspberry Pi 3 supports all versions of NEMS Linux. Raspberry Pi 3 Model B+ requires NEMS 1.3.1 or higher. 
- 
-The Raspberry Pi 3 is a quad-core SBC which NEMS Linux will automatically throttle between 600 MHz and 1.2 GHz depending on need. It has a low-speed SD card reader, USB 2.0, 10/100 Ethernet, 1 GB DDR2 RAM and 802.11n WiFi. 
- 
-The Raspberry Pi 3 Model B+ supports speeds around 15-20% higher, with significantly faster Ethernet (Up to 330 Mb/sec). 
- 
-  * Raspberry Pi 3/3 B+ Micro Computer 
-  * 8GB+ Micro SD Card (Recommend 16GB-32GB). **Note:** Keep in mind, not all > 32GB SD cards will work with the Raspberry Pi 3, so best to go with a maximum 32GB to ensure system stability. 
-  * Network Connection (will obtain IP address via DHCP: create your reservation in the DHCP server for ease of access) 
-  * Internet Connection 
- 
-===NEMS Linux on ODROID XU4=== 
- 
-In order to run NEMS Linux on the ODROID XU4 (or its "​quiet"​ XU4Q model) you will need NEMS Linux 1.4 or higher. The ODROID XU4 is an octa-core SBC which NEMS Linux will automatically throttle between 1.0 GHz and 2.0 GHz depending on need. It has a UHS-I SD card reader, eMMC storage capability, USB 3.0, Gigabit Ethernet and 2 GB DDR3 RAM. 
- 
-  * ODROID XU4/XU4Q Micro Computer 
-  * 8GB+ Micro SD Card or 8GB+ eMMC Card (Recommend 16GB-32GB). 
-  * Network Connection (will obtain IP address via DHCP: create your reservation in the DHCP server for ease of access) 
-  * Internet Connection 
  
  • system_requirements.1549297950.txt.gz
  • Last modified: 2019/02/04 11:32
  • by 127.0.0.1