NEMS Linux for Khadas Single Board Computers
Khadas VIM3
If you are unable to boot NEMS Linux from your microSD card or USB flash drive on a Khadas VIM3 board, please be sure to use the Krescue tool first to perform a full erase of your eMMC. https://dl.khadas.com/Firmware/Krescue/dump/VIM3.krescue.sd.img.gz
You can boot from SD or USB, then install NEMS Linux to the integrated eMMC storage by typing;
sudo nems-install
LED Indicators
The Khadas VIM3 contains two buil-in LEDs which NEMS Warning Light utilizes by default.
LED |
Meaning |
---|---|
White Flashing |
Unknown State or System is Booting |
White Solid |
OK state |
White Solid, Red Flashing |
Warning State |
Red Solid |
Critical State |